Art. Nr: 37025
Samarium-Cobalt deep pot magnet Ø25x35mm without thread
A long rod magnet system with a SmCo magnet core in a brass housing and an holding force of 400 newtons (approx. 40 kg). Samarium-cobalt deep pot magnets are characterized by their high temperature resistance up to 180°C.
€30.85
Shipping in 1-2 business days
€30.85
€27.85
€23.21
€20.90
€18.71
Product features
- Heat-resistant, high-quality samarium cobalt magnet with high holding power.
- Temperature resistant up to 180°C.
- Magnetic force is redirected and multiplied by 2 pole pieces on the holding surface.
- Magnetic system protected by brass pot and magnetism shielded to the outside.
- Installation by gluing, shrinking or careful pressing.
- Diameter, dimension and position tolerance h6.
- Can be shortened by dimension A.
Description
| Diameter ØD (mm): | 25 |
|---|---|
| Height (mm): | 35 |
| Holding force (N): | 400 |
| Magnet material: | samco |
| Design: | without thread |
| Housing material: | brass |
| Temperature resistance (°C): | 200 |
| Weight (kg): | 0.134 |
| Additional property: | Maß A: um 7mm kürzbar |
Technical Drawing
Areas of application
In a bar magnet system, the housing is usually made of steel, in which the raw magnet is embedded, similar to pot magnets. On the other hand, deep pot magnets with a brass housing are constructed with a transverse raw magnet and two adjacent metal pieces (known as a pole shoe system) to ensure a high concentration of the magnetic field and maximum holding force. The brass housing is corrosion-resistant and the holding surface of these bar grippers can be machined, unlike flat grippers with a steel housing. This advantage is particularly important for the following application:
- Machine and fixture construction: Samarium-Cobalt pot magnets are ideal for applications in machine and fixture construction where high ambient temperatures prevail and the highest precision is required at the holding surface. After installation, the holding surface can be easily mechanically reworked – whether by milling, turning or grinding – to meet the requirements for tolerance accuracy.
Further sizes
-
From 1€13.70
-
From 20€11.78
-
From 50€10.16
-
From 100€8.51
-
From 500€7.41
-
From 1€14.72
-
From 20€12.71
-
From 50€11.13
-
From 100€8.86
-
From 500€7.60
-
From 1€18.94
-
From 20€17.22
-
From 50€14.75
-
From 100€12.14
-
From 500€10.02
-
From 1€49.19
-
From 20€44.24
-
From 50€40.28
-
From 100€37.67
-
From 500€31.78