Art. Nr: 70301
Permanent magnetic chuck Ø150mm
For clamping ring-shaped workpieces for grinding and turning. The chuck holds the turned part securely by steplessly applying magnetic force. The clamping is done over the ring surfaces, so no distortion occurs in thin-walled parts.
€735.00
MagnaC.stockWarning
€735.00
€708.75
Product features
- Place the turned part, align it with the centering grooves, turn the chuck key, and you're done.
- The magnetic force is applied smoothly and securely holds the turned part. The ring surface and not the clamping jaws are used for clamping. Therefore, no distortion occurs in thin-walled parts.
- No heat distortion because no energy is supplied.
- Easy centering of the workpiece through ring slots. Sector-shaped pole arrangement.
- Eight mounting thread holes on the rear on two pitch circles. Coolant can be supplied through a central through-hole.
- Ideally suited for holding radially adjustable pole shoes.
- Including chuck key in the scope of delivery.
Description
| Diameter ØD (mm): | 150 |
|---|---|
| Height (mm): | 57 |
| Holding force (N/cm²): | 140 |
| Switchable: | yes |
| Weight (kg): | 6.8 |
Areas of application
Magnetic chucks are clamping tools designed to securely hold turned parts during machining. It works with permanent magnets that generate a uniform magnetic force without the need for an external power supply. This means that there is no heat distortion on the turned part, since an energy supply is not necessary. Magnetic chucks are used in the following applications:
- Metalworking: Magnetic chucks are used to securely hold round workpieces on lathes during machining. They ensure stability and minimize vibration, which improves machining quality. They also allow for distortion-free fixing because they do not use heat and pressure, but only magnetic force.
Further sizes
-
From 1€945.00
-
From 3€908.25
